GW1935 is a 19 x 35mm pine wooden Stretcher Bar in Gowin’s Standard Wooden Stretcher Bars range. Gowin states Stretcher Bar dimensions as thickness x width, so this profile has a 19mm thickness and a 35mm width. It is an outer frame component used to form the perimeter over which the canvas is stretched.
GW1935 can be supplied in tenoned or non-tenoned structures, with lengths up to 300cm. Before ordering, confirm the finished frame sizes, required bar lengths, canvas specification, assembly method and packing requirements so the complete frame specification can be reviewed together.
Request a GW1935 Sample or Quote
Product Specifications
| Specification | GW1935 |
|---|---|
| Model | GW1935 |
| Product Type | Outer wooden Stretcher Bar |
| Product Family | Standard Wooden Stretcher Bars |
| Profile Size | 19 x 35mm (1.9 x 3.5cm) |
| Profile Thickness | 19mm |
| Profile Width | 35mm |
| Material | Pine wood |
| Wood Construction | Finger-jointed where applicable |
| Drying Method | Kiln-dried |
| Corner Structure | Tenoned or non-tenoned options |
| Maximum Length | Up to 300cm |
| Surface | Smooth-sanded wood |
| Standard MOQ | 1,000 pcs per size; a lower quantity may be discussed depending on the complete order |
Product Features
19mm Thickness x 35mm Width
The GW1935 profile measures 19mm in thickness and 35mm in width. Both dimensions should be checked together with the finished frame dimensions, canvas specification, stretching tension, internal support requirement, assembly method and final application.
Tenoned and Non-Tenoned Options
For standard tenoned bars, the four frame sides are normally assembled by fitting the machined corner joints together, so conventional frame nailing is generally not required for basic assembly. Additional reinforcement may still be used depending on the complete frame structure and application.
Non-tenoned bars can be supplied when you have your own tenoning machinery or intend to use direct-nailing frame assembly. Confirm the required structure before sampling and quotation.
Assembly Fit Confirmation
Corner fit can be confirmed during sampling according to your intended assembly method and frame-production requirements.
Recommended Applications
- Stretched canvas production
- Printed canvas and photo canvas frames
- Decorative wall art
- Standard-profile canvas-frame programs
- Wholesale and private-label canvas-frame production
How to Evaluate the 19 x 35mm Profile
Profile selection should begin with the complete finished frame specification. Review the finished frame dimensions, 19mm profile thickness, 35mm profile width, required profile shape, canvas material, stretching tension, internal support plan, assembly method and final application before confirming GW1935.
If you are developing a new frame program, test the profile with the intended canvas and frame dimensions. If you are matching an existing product, provide a cross-section drawing or physical sample so the complete profile can be confirmed.
GW1935 and GW2035 Profile Comparison
GW1935 and GW2035 are both Standard Wooden Stretcher Bars with a 35mm width. GW1935 has a 19mm thickness, while GW2035 has a 20mm thickness. The 1mm thickness difference should be reviewed together with the complete profile and finished frame specification.
| Model | Profile | Product Family | Key Difference |
|---|---|---|---|
| GW1935 | 19 x 35mm | Standard profile | 19mm thickness with 35mm width |
| GW2035 | 20 x 35mm | Standard profile | 1mm thicker than GW1935 with the same 35mm width |
Internal Support Guidance
GW1935 forms the outer perimeter of the frame. Internal Supporting Bars are separate components that may be added according to the complete frame structure.
As a general starting point, internal support should normally be considered when the long side reaches approximately 60cm. This is general guidance rather than a fixed engineering rule, and it does not mean that every frame at this size requires a Supporting Bar.
The actual requirement depends on the finished frame dimensions, outer Stretcher Bar profile, canvas specification, stretching tension, support layout and final application. If you already use a particular support profile or frame drawing, include it for confirmation before production.
Ordering, Lengths and Customization
Lengths and Order Quantities
GW1935 can be supplied in lengths up to 300cm. For quotation, provide the required length list and quantity for each size. The standard MOQ is 1,000 pcs per size, although a lower quantity may be discussed according to the composition and total quantity of the complete order.
Profile and Assembly Requirements
Please confirm whether you require tenoned bars for fitted-corner assembly or non-tenoned bars for your own machining or direct-nailing process. Assembly fit, packing and labeling requirements can be confirmed according to the order.
If you are matching an existing Stretcher Bar, provide a profile drawing, complete cross-section dimensions or a physical sample where available. Include the finished frame sizes, canvas specification and estimated quantities so feasibility, sampling and MOQ can be confirmed.
Wood, Production and Quality
GW1935 follows the general pine-wood and production basis used for Gowin’s wooden Stretcher Bars. The wood is kiln-dried before machining, and finger-jointed construction is used where applicable.
During production, we check profile dimensions, straightness, surface sanding, joint fit and packing condition. Regular pine may include slight sound knots. If a cleaner appearance or different wood-grade requirement is needed, confirm it before sampling and quotation.
Packing and Export Supply
OEM and private-label packing are available. Packing and labeling requirements can be confirmed according to the bar lengths, quantities, corner structure and shipping method.
For full-container orders, FOB terms can be discussed; otherwise, supply is normally based on EXW terms. DDP or door-to-door delivery can also be discussed according to the destination and order requirements.
Sample and Profile Confirmation
Samples are available. Before bulk production, confirm the 19 x 35mm profile together with the intended canvas, frame size and assembly method so the complete frame specification can be evaluated.
For sample and quotation preparation, please provide:
- Finished frame sizes
- Required bar lengths and quantities by size
- Profile drawing, cross-section dimensions or physical sample, if available
- Canvas specification and stretching method
- Tenoned or non-tenoned structure
- Internal support requirement, if already known
- Packing requirements and destination
Frequently Asked Questions
What do the GW1935 dimensions mean?
GW1935 measures 19 x 35mm. Following Gowin’s thickness x width convention, this means 19mm thickness and 35mm width.
Is GW1935 an outer Stretcher Bar?
Yes. GW1935 is a Standard outer wooden Stretcher Bar used to form the perimeter of a canvas frame. It is not an internal Supporting Bar or Cross Brace.
How does GW1935 differ from GW2035?
Both models have a 35mm width. GW1935 has a 19mm thickness, while GW2035 has a 20mm thickness. Confirm the required model from the complete profile and frame specification.
When should internal support be considered?
As a general starting point, internal support should normally be considered when the long side reaches approximately 60cm. This is not a fixed rule; the final requirement depends on the complete frame dimensions and structure.
Request a GW1935 Sample or Quote
Send us your required frame sizes, bar lengths, quantities, profile drawing or sample, canvas specification, assembly preference, internal support requirements, packing requirements and destination. We will help confirm whether GW1935 matches your frame-production requirements and provide the relevant sample and quotation details.